25' Momentary Switch f/Select HTP America® MIG & TIG Welders & Miller® – HTP America - USA Weld

25' momentary/arc-start switch, with 14-pin plug, for select HTP America® MIG and TIG welders, along with numerous Miller® TIG welders. Fits the following HTP welders: Invertig 301, Invertig™ 313, Invertig™ 400, Pro Pulse™ 220 MTS, and Pro Pulse™ 300, and Revolution2500. Fits most modern Miller TIG welders utilizing a

25' momentary/arc-start switch, with 14-pin plug, for select HTP America® MIG and TIG welders, along with numerous Miller® TIG welders. Fits the following HTP welders: Invertig 301, Invertig™ 313, Invertig™ 400, Pro Pulse™ 220 MTS, and Pro Pulse™ 300, and Revolution2500. Fits most modern Miller TIG welders utilizing a 14-pin remote control connection.

You can use the arc start switch with 2T or 4T. In 2T-you set the machine to the amperage you want and then press the button to start arc. It will slope up to the amperage you have set. You must hold the button down while welding-when you let go of the button it will slope down and stop welding.

In 4T-you press the button and it starts. When you let go it will slope up to the adjusted amperage then when you press the button the 2nd time press and hold it slopes down to the final current. Release the button and the arc extinguishes and it goes into post flow.

25' Momentary Switch f/Select HTP America® MIG & TIG Welders

15 Series (180A) flex neck MIG gun with a 4-pin Amphenol trigger connection (only two pins used, though) for select Auto Arc®, Hobart®, MAC Tools®,

15 Series (180A) Flex Neck MIG Gun f/Select Auto Arc®, Hobart®, MAC Tools®, & Miller® Welders

hynade Mig Welder, Mig Welding Machine Dual Voltage 110/220V Gas

Machines Toll Gas & Welding Supply

Invertig 201 AC/DC

Momentary/arc-start switch for HTP America® Invertig 221 AC/DC TIG welders. Fits air-cooled and water-cooled torches and easily attached to your TIG

Momentary Switch for HTP America® Invertig 221 AC/DC TIG Welders

Big Blue 300 PRO CAT - Miller

Machines Toll Gas & Welding Supply

25' Momentary Switch f/Select HTP America® MIG & TIG Welders

25' momentary/arc-start switch for Everlast® TIG welders utilizing a 7-pin remote control connection. You can use the arc start switch with 2T or 4T.

25' Momentary Switch for Everlast® TIG Welders

hynade Mig Welder, Mig Welding Machine Dual Voltage 110/220V Gas

Touch 4 TIG Welding Remote Fingertip Torch Hand Control - SSC Controls

25' Momentary Switch f/Select HTP America® MIG & TIG Welders

2012 FULL-LINE CATALOG - Miller